CLIN
  •   
  •   +6(04) 398 1778
Cleanroom Doors Make The Difference

Cleanroom Doors Make The Difference

Whether it’s a Class 100 or a Class 10,000 cleanroom, manufacturers in pharmaceutical, biopharmaceutical, medical device, electronic, and other critical manufacturing industries require their cleanrooms to be simultaneously functional, flexible, economical, practical, and of course, clean. But, while the current ISO 14644-1 and ISO 14644-2 Standards still call attention to the function of air filtration and air distribution in cleanroom design, the regularity and relative consistency of these systems across manufacturing platforms has ushered in a new age of cleanroom design focused on all components of the room, including floors, walls and especially doors.

Several factors should be carefully investigated before investing in a door system solution for the cleanroom environment:

Air Pressure And Sealing
To support air filter technology, maintaining appropriate room pressure and seal is of utmost importance. With airflow levels and negative pressures in the hallway between suites, particles can travel easily and threaten the quality of controlled substances manufactured at any given facility. This is exactly why door system design should contain proper sealing to control pre-determined air circulation rates as well as reduce airborne contamination.

Cleanability
Logically, cleanroom doors are cleaned frequently. Cleanroom designers are constantly looking for cleanroom doors that can maximize cleanability, while standing up to chemical treatment. A recent study showed today’s standard door materials deteriorate visibly over 30, 60, and 90 days when subjected to standard chemical solvents. The doors that fared best in this experiment were fiberglass doors manufactured much in the way fiberglass boats are created, using durable, seamless layers with no edges or grooves. Cleanroom doors should also be manufactured with minimal ledges, crevices, and angles. This inhibits dirt and bacteria from collecting easily and makes it easier to withstand frequent cleaning. Surfaces should be non-shedding, non-porous, and resistant to sustaining microbial and fungal growth, as well as designed to tolerate consistent cleaning and sanitization with a number of chemicals. Some cleanroom doors are even installed without drilling into the floor. Just imagine the particulates that accumulate in the crevices resulting from floor installation and bolt-fitting, and how difficult these areas are to clean. Coupled with cleaner installation, which limits additional particulates that are released into the air, doors installed without floor drilling are better choices for cleanrooms.

Corrosion
Problems with corrosion go hand-in-hand with constant cleaning, especially with older door systems. It is not uncommon for old-style cleanroom and lab areas to be outfitted with hollow metal or aluminum doors. Painted steel or aluminum could shed particles. Eventually, these types of doors start to flake, deteriorate, and sometimes virtually dissolve after being exposed to toxic and severe cleaners. This long-term corrosion problem, coupled with cleanability issues, can cost manufacturers money in the long run. When it comes to corrosion, cleanroom designers can’t afford anything less than perfectly seamless door solutions for their facilities. What cleanroom designers really need to look for are fiberglass doors, which provide maximum corrosion protection with a fully enclosed panel. This investment will pay dividends in the end. Corrodibility is not only a lurking problem on the door’s surface, but can also affect the door’s tracks. While aluminum or galvanized tracks are a less expensive option, they are corrodible. Stainless-steel tracks, on the other hand, offer longevity, durability and the ultra-clean look companies and regulators are looking for, especially if European standards are at stake.

Flexibility and Security
Besides the cleanability and durability factors, cleanroom doors should offer various options for flexibility to fit personnel’s needs as well as process requirements. Having flexible door systems enables project engineers to outfit cleanrooms with doors needing vision panels, pushplates or other activation devices, magnetic locks, and interlocking systems. Utilizing interlocks, sometimes referred to as “airlocks,” is not uncommon, especially in personnel entrances and exits, gowning and de-gowning areas, and material transfer airlocks in cleanroom environments. The functional concept of the interlock is to prevent two doors from being open at the same time, thus preventing air infiltration from one space directly to the other. This is typically done in cleanroom environments to prevent outside, airborne contamination from entering the process areas.

Efficiency
Ultimately, the new age of cleanroom design gravitates toward greater efficiency and cost savings. Practical cleanroom design minimizes HVAC requirements, reduces cleaning and maintenance costs, and withstands the conditions in which they function. By investigating in cleanroom door products with an eye toward air seal, cleanability, corrosion, flexibility, and security, designers can provide increased returns over the life of their doors and the cleanrooms as a whole.

In short, cleanroom doors significantly contribute to the clean level of critical environments. There are plenty of cleanroom door companies out there. Make sure to look for a company with experience in the marketplace and proven technology and performance. Making these considerations now will make all the difference in the future.

 Resources & Articles

CLIN ® "Resources" page is for individuals/companies seeking information on cleanrooms and controlled environments. Find Cleanroom News, Discussion Forums, Cleanroom Cleaning Recommendations, Cleanroom Terminology, Cleanroom Directory, and more.

 Content Disclaimer

Information are contributed by/from different websites and all credit goes to its respective owners/writers/websites/companies and etc, and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.

Through this website you are able to link to other websites which are not under the control of respective owners/writers/websites/companies and etc. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Every effort is made to keep the website up and running smoothly. However, CLIN ® takes no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control.

We are experienced in Cleanroom Solutions

Call Us for Consultation +6(04) 398 1778

About CLIN

Cleanroom Industries Sdn. Bhd. was founded in 1999 as a pioneer manufacturer in Malaysia specializing in design and manufacture of a full range of cleanroom-related architectural products for cleanroom applications up to Class 1 cleanliness.

Awards & Recognitions

ISO 9001 Malaysia Power Brand Super Excellent Brand Sirim QAS Made in Malaysia Asia Pacific International Honesty Enterprise Keris Award